2/15/2024 0 Comments Raspberry pi zero install cameraFrom the Main menu open Preferences> Raspberry Pi Configuration.Raspberry Pi OS has the drivers and support for CSI cameras built-in, but it is disabled by default. Repeat the procedure with the camera connector on the Pi Zero making sure the black ribbon cable marker faces upwards.With the black marker facing away from the lens, slide the ribbon cable carefully into the connector.Use the orange ribbon cable with black markers.Repeat the procedure with the CSI connector on the Raspberry Pi making sure the blue ribbon cable marker faces towards the USB ports.Close the connector by pushing the tabs back into place.With the blue marker facing away from the lens, slide the ribbon cable carefully into the connector.On the camera module, pull up the ends of the CSI connector tab.Use the white ribbon cable with blue markers.Separate ribbon cables for both types are included.Įnsure the Raspberry Pi is powered off before installing the camera. The camera module connects via a ribbon cable to the CSI connector on the Raspberry Pi or Pi Zero.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |